How I Work - The Process

Using porcelain and earthenware clay, I slip cast and hand build my sculptural  pieces

1

Research

Many ‘precious objects’ have been passed down to me from my parents and grand parents but I also collect things that appeal to me from flea markets, skips and beaches. Then I basically play with these bits and pieces, arranging them like a collage until inspiration strikes. I also read and ponder a lot and draw a bit.

2

Create Model

Sometimes I make the original model from clay. Sometimes I use ‘found’ objects as models. I also make plaster models using a lathe if I want something perfectly symmetrical. I used plaster poured into balloons for my pendant jewellery.

3

Making Plaster Moulds from the Model

  I make plaster moulds so that I can reproduce my desired object’s size and form. The decoration and finish can then be varied. I also enjoy the lengthy, messy process that is mould making.

4

Slip-Casting and Press-Moulding

   Liquid clay (slip) is poured into a mould and left for a period of time before the excess clay is poured away leaving a skin of porcelain in the mould resulting in a hollow object. Press-moulding involves making a thin slab of clay and pushing that into the mould before joining the two (or more) sides together.

5

Decorating

   The excess clay is trimmed away. I either leave the clay bare or use underglazes and slips to paint my work. I use a needle to make tiny holes in the form and ‘incise’ patterns using a knife.

6

Glazing

  The object is  left to dry and then has  its first (bisque) firing  which transforms it from clay into ceramic. I then apply a shiny or matt clear glaze and re-fire it to as high as 1260 degrees Centigrade. The firing process takes about 24 hours.

7

Applying Decals and Lustre

    I use real gold and silver lustre and gold leaf decals for the final decoration. The object then goes back in the kiln for its third firing so that the decals and lustre can melt into the glaze.

8

Adding Fixings

   For pendants, a vintage pocket-watch key is attached to it and is finished by adding either a sterling silver or leather chain using silver wire. The men’s pendants with their pocket watch keys are attached to vintage and modern giant safety pins.